INTRODUCTION

vue 'CAO' (abréviation de 'Conception Assistée par Ordinateur') du projet tricycle conçu par Yann ALLGAYER en 2011

In a few words

Allyameca design office is born from the exceedent of passion and motivation of an engineer in mechanics after more than 10 years of experience in industrial equipment designing for the industry.
In 2021 the Allyameca design office in mechanics has been created at the little village of Mommenheim by Yann Allgayer who is president and designer at once.
With 14 years of experience in designing of circuit-breakers, Industrial bread ovens, pharmaceutical production equipments, automotive industry
The little firm has began with an experience wich is not only theoric.

See above the project "tricycle" has been done in year 2011 by the firm creator when he still was at school at the "INSA Strasbourg" wich means "Applied Science National Institute" in Strasbourg.


Specialties of the office

Allyameca engineering design office is one of the best-placed to provide these types of projects to it's customers :

  • Mounting, testing and setting industrial fixtures
  • Industrial production and testing machines (product-dedicated/special machines)
  • Ergonomic and effective workplaces
  • Urgently design in mechanics (fixtures, machines, workplaces)
  • Continuous improvement of production processes (mounting, testing...)
  • Design calculation notes, strength of material, part dimensionning
  • 3D printing by Allyaméca or by using subcontracting : processes : SLS SLA and others on demand...

Our office can design your products and machines by using following softwares :

  • Dassault Solid-Works (Example above)
  • PTC Creo (old "Pro-Engineer")
  • Dassault Catia
  • All other software on demand...

Work terms and conditions

Allyameca office will propose you to work together these ways :

  • Work will be detailed into a product specification document given by the customer
  • Using of a non-disclosure agreement to ensure the confidentiality between customers and Allyameca
  • All terms and conditions are specified innto a free quote on customer demand
  • No commitment or constraint like with an employee relationship
  • Customers are free to decide to switch the way to work with Allyameca, on demand for free.

Types of offers proposed

  • Engineering in mechanics studies only
  • Engineering in mechanics studies with project leading including request for quotation with more than 10 usual suppliers of the office.
  • Prototyping Projects with design and 3D printing steps included for your products and everyday-use objects. A feasibility test will be made before taking the study on charge.
  • Your product mounting can possibly be added to the initial offer.
  • Dimensionning for mechanical products, calculation notes, handwritted with the wanted details. (Included in a study or as a standalone demand).

PROJECTS FOR INDUSTRY

Measurement fixture - 3 meters long giant calliper

There is a measurement fixture to ensure quality with parts dimensions to fit with the technical drawing.

This projects deals with an update of an actual equipment. The goal is to improve it with studying of an additional function that is measurement of X and Y drilled holes'axles positions on the part.

Extracts from the specification book :

  • User friendly
  • Holes measurement :Ø1 to Ø20mm.
  • Accuracy : 0.1mm
    • 3 straight measures (X Y et Z) AND the 2 others for holes'position in X and Y are done by only 2 pairs of instruments and displays
    • Max length (X axle) to measure : 2800mm
    • Max width (Y axle) for measured part : 300mm - 11.81'
    • Accepted part thicknesses : [5 ; 25]mm = [25/127 or .197 ; 125/127 or .984] inch
  • Decrease number and time from maintaining operations
  • Only one big sub-assembly to mount on theactual machine
  • This machine "PAC" ("Pied à Coulisse" in french) will be produced in 5 declinations wixh one of them is'nt as the four others
Project released with the agreement of the final customer : a great company in fixture production.


Concrete formwork calculation tool

Design of an informatical tool for concrete formworks calculation
This tool permits user to validate the following mechanical properties:

  • Formwork skin mechanical strenght in bending
  • Formwork skin mechanical strenght in shear
  • Formwork skin deformation
  • Formwork stiffeners mechanical strenght in compression
  • Safety coefficient and material choice
Project released with the agreement of the final customer : Pro Coffrage Service


Calculation and analysis of structural designs

Verifiying and design calculation for steel structures as machine frames, metallic armatures or building steel structures.
Checking of normative compliance of access means (walkways, guardrails, stairs) with NF E85-015 specifications. All other specification on demand.
Providing of advices and suggestions of modification to the customer to fit with normative specifications in effect.


Feeding station for an automatic assembly machine

This study is about parts feeding to be mounted automatically by this 8 steps (stations) machine designed on a rotating plate basis ;
More information will not be released according to the customer demand.


Aluminium frame for sim-racing driving simulation

--> All sheetmetal parts and frame have been designed and drawed by ALLYAMECA
3D view released with the agreement of the final customer.

Refill window for full automatic production machine

There is manual refill system wich has many advantages as described below.

Specification book extract :

  • Seal-closed door when not used
  • Noise reduction from vibration of the machine
  • Door openning and parts refill done in only one movement by the operator
  • Safety protection made with a Schmersal-type switch
  • Compliant with standardized "Schäfer" boxes
  • No maintaining needed from the user
  • System used on 4 different machines
Views released with the friendly agreement of the society Hager Electro.


Molds and cutting machine for artisanal soap production

This project has been asked by a firm of soap production in Alsace-France.
three cutting machines are in production actually and trials will begin soon.
Red and blue parts are 3D printed by ALLYAMECA.
During mounting and trials, some more photography will be added in this section.

This equipment permits a higher productivity than what is actually made in soap domain.
In a few time a set with molds and a cutting machine could be sell by Allyameca These equipments are compliant with the soap industry normative environnement.


Customer comment :

"These equipments will permitt me to be more efficient to produce my soaps and to reduce production costs. Theremore I am proud to have set this very interresting project up with Yann the designer"
Comment from Morgane, soap-maker.

Dimension measurement fixture

This project is a demonstration one for industrial customers.
Here the domain is electrical devices production.

vue 'CAO' 
            (abréviation de 'Conception Assistée par Ordinateur') du projet 'gabarit de contrôle dimensionnel pour appareillage électrique industriel' vu de trois quart

Design step has been realized into one week. Its only goal is to show design competences of the office. Qualities of this fixture are accuracy, repeatability and reproducibility.

BUSINESS PROJECTS

Custom-made engine intake for Renault Super 5 GT Turbo de 1990

This assembly has been designed from 2019 to 2020 on the demand of a customer who is driving on race with the FFSA (French Federation for Automotive Sports) ;
Catégory 1/4 and 1/8 miles.
This custom-made motor intake permits to mount two carburetors in place of only one as originally.

Photographie des deux pièces principales de l'admission conçue sur mesure pour la Renault Super 5 GT Turbo Photographie des pièces principales de l'admission conçue sur mesure pour la Renault Super 5 GT Turbo avec les deux carburateurs montés Photographie de la pièce principals avec joint torique sur mesure pour la Renault Super 5 GT Turbo

Customer comment :

"This custom-made motor intake designed by Allyameca will permit my car to be more powerfull, and give me the satisfaction to have an unique system wich is the most adapted to my need to win my runs at the FFSA.
Yann, the designer has been very attentive to my demand and he responded very accurately so I am very satisfied by his work and efficient methods.
I advise industrial societies as private customers to work with Allyameca.

Comment from Prosper, competitor and pilot at the FFSA. Photographie de toutes les pièces de l'admission conçue sur mesure pour la Renault Super 5 GT Turbo

Photographies of the mounting wich is in progress nowadays :

Photographie de l'ensemble de l'admission montée dans la Renault Super 5 GT Turbo #1 Photographie de l'ensemble de l'admission montée dans la Renault Super 5 GT Turbo #2

All mounting and setting operations are made by the customer who is a specialist in turbo motors.


SIM-racing pedalboard for computer and game console

Here is a project for a private customer. This pedalboard made for the driving/piloting simulation is low-cost to build and provides a high level of in-game sensations to the user.

vue 'CAO' (abréviation de 'Conception Assistée par Ordinateur') du projet 'pédalier sim-racing' vu de face vue 'CAO' (abréviation de 'Conception Assistée par Ordinateur') du projet 'pédalier sim-racing' vu de dos

The project lasts approximatively one year and will be build during the year. The original goal for the customer is to have some fun by having his own, high quality and unique pedalboard.
It will provide the same feeling as his real race car wich is a prepared "Mazda M5". This model is called "Eunos roadster" and "Miata" in some other countries in the world.
In the future the marketing of this pedalboard could be planned.

Some more information about the sim-racing pedalboard for computer and game console ;
Extracts from the specification book :

  • The clutch hard point has been reproduced to be exactly the same as in the reality
  • All the strenghts that the user feels has been reproduced by using real strenghts measured on the real race car Mazda MX-5 .
  • On this pedal board system, strenghts are directly measured by a very accurate strenght sensor to ensure to match to the reality.

Off-topic projects

Mechanical mod for electronic cigarette

Now available for sell !
See below

This project has been designed and printed at home, uniquely for the well-beeing of the designer who has stoped smoking since middle of year 2021.
The design step lasts one week, 20 printing hours and approximately one week of mounting and wiring for one to two hours a day.

Vue du mod mécanique en cours de fabrication, opération de câblage et soudage électrique Vue du mod mécanique en utilisation avec un atomiseur reconstructible du commerce de type Steam-Crave Aromamizer Ragnar RDTA

The result is very unusual with its atypical shape.
The mech can bear 3 18650 battery type, wired in parallel : It permits to connect a very low resistance (from 0.14Ohm to more) in total safety with rechargeable batteries that admitts 10A as continuous discharge current "CdC".

A personalizable writing can be add on the bottom of the product like this :
Vue du mod mécanique en cours de fabrication, vue marquage personnalisable

Tested and approved !
Everyday use since the releasing of the project !

  • Price for the same as on the photography "ALLYAMECA" : 190€
  • Price for the same as on the photography with personnalized writing "TEXT TO BE DEFINED" : 230€
    (2x 4 to 5 letters max.)
  • Price for a shape on demand (battery number, positions of all the parts, buttons, display, ext. diameter for the atomizer etc..) : To be asked at contact@allyameca.fr
  • (non applicable VAT)
    (wide choice of colours up to 7 differents colours for a product as one colour a part)

Home-made 2 ways hi-fi speakers

This is a personnal project, only for pleasure.

vue de l'atelier pendant l'étude des courbes de sortie des haut-parleurs vue d'une des enceintes au cours du montage des haut-parleurs dans les caisses

These speakers has been calculated, designed and built by Yann Allgayer.
Filters, enclosures and acoustic effects has been calculated with the best methods and professionalism by the designer.
The result is very great to listen, around 20 people have seen it and found it very good at a private event.


Custom-made subwoofer for Volkswagen Golf (German brand car)

Custom-made subwoofer for Volkswagen Golf

This subwoofer has been designed for a customer who wanted a new one with special conditions.
(space requirement, power, using of two loudspeakers already owned by the customer.
Building has been done by the customer herself.
The subwoofer is held in place by two wedges (3D printed parts) designed and produced by Allyameca.


FDM 3D prints

electrical transformer frame :

support transformateur électrique

Drawed from the original part, Printed 4 times

Socket covers and refrigerator door runners :

caches-prise et glissières frigo

refrigerator door runners has been drawed from the original part, then printed 4 times ;
Socket covers has been printed near 20 times

Lid for closing cans :

couvercle pour boite de conserve

Regular use, printed many times and in some diameters

Contact and legal mentions

mécanisme à courroies multiples source : base d'images libres de droit sur internet 'unsplash.com'

Contact :

Allyameca engineering office is reachable by the following ways :

Yann Allgayer, président and designer will be your direct interlocutor. He will take charge of your requests for quotation , your studies in mechanics with rigor and professionnalism.


Internet website

This website has been entirely designed by Yann ALLGAYER in march 2021 (with an update on November 2023) as a beginner in website designing. If some mistake or problem are found, thanks to send an email at "contact" by clicking on this link.


Identification :

  • Company commercial name : ALLYAMECA
  • Company name : ALLGAYER YANN MECANIQUE
  • Head office : 3 route d'Obernai – 67130 Russ - France
  • Phone number : +33 (0)3 67 97 55 32
  • Email adress : contact@allyameca.fr
  • Legal form of the company : french micro-company (04-2023)
  • Name of director / co-director of publication : Yann ALLGAYER
  • Name, denomination, adress and phone number of the hosting company : OVH 2, rue Kellermann 59100 ROUBAIX

Activity :

  • Registration number on the trade registry :
    949 915 953 (City of Saverne trade registry)
  • General terms and conditions of sale are available here.

Mentions on personnal data use :

The company ALLYAMECA collects on its website, visitors, prospects and customers personnal data, that have been sent from them to Allyameca.
These data are uniquely collected in the goal of keeping contact and make a following of demands. The legal basis of this data treatment is the legitimal interest of ALLYAMECA.
Collected data could be your name, adress, email adress, phone number and every other data that you would give to us spontaneously.
No automatic treatment of your data will be done. Your data will be secured and covered byconfidentiality. Data will be keeped for a 24 month duration.
You have the right to access, to modify, to delete your personnal data, in accordance with "RGPS" disposal (General data protection regulation). It is also possible to ask for an abortion ofthe treatment of your personnal data. You ca asserting your rights by sending an email or a regular mail to Yann Allgayer - Allyameca. You can refer to the competent authority to set a reclamation about your data, in France the authority is "CNIL" 3 place de Fontenoy, 75334 PARIS.
The responsible entity of data treatment is : ALLYAMECA SAS, represented by Mr. ALLGAYER 3 Route d'Obernai – 67130 Russ - France.


Mentions about cookie use

The ALLYAMECA website does not use cookie.


Website update :

November 2023

Elements

Text

This is bold and this is strong. This is italic and this is emphasized. This is superscript text and this is subscript text. This is underlined and this is code: for (;;) { ... }. Finally, this is a link.


Heading Level 2

Heading Level 3

Heading Level 4

Heading Level 5
Heading Level 6

Blockquote

Fringilla nisl. Donec accumsan interdum nisi, quis tincidunt felis sagittis eget tempus euismod. Vestibulum ante ipsum primis in faucibus vestibulum. Blandit adipiscing eu felis iaculis volutpat ac adipiscing accumsan faucibus. Vestibulum ante ipsum primis in faucibus lorem ipsum dolor sit amet nullam adipiscing eu felis.

Preformatted

i = 0;

while (!deck.isInOrder()) {
    print 'Iteration ' + i;
    deck.shuffle();
    i++;
}

print 'It took ' + i + ' iterations to sort the deck.';

Lists

Unordered

  • Dolor pulvinar etiam.
  • Sagittis adipiscing.
  • Felis enim feugiat.

Alternate

  • Dolor pulvinar etiam.
  • Sagittis adipiscing.
  • Felis enim feugiat.

Ordered

  1. Dolor pulvinar etiam.
  2. Etiam vel felis viverra.
  3. Felis enim feugiat.
  4. Dolor pulvinar etiam.
  5. Etiam vel felis lorem.
  6. Felis enim et feugiat.

Icons

Actions

Table

Default

Name Description Price
Item One Ante turpis integer aliquet porttitor. 29.99
Item Two Vis ac commodo adipiscing arcu aliquet. 19.99
Item Three Morbi faucibus arcu accumsan lorem. 29.99
Item Four Vitae integer tempus condimentum. 19.99
Item Five Ante turpis integer aliquet porttitor. 29.99

100.00

Alternate

Name Description Price
Item One Ante turpis integer aliquet porttitor. 29.99
Item Two Vis ac commodo adipiscing arcu aliquet. 19.99
Item Three Morbi faucibus arcu accumsan lorem. 29.99
Item Four Vitae integer tempus condimentum. 19.99
Item Five Ante turpis integer aliquet porttitor. 29.99

100.00

Buttons

  • Disabled
  • Disabled

Form